Have you ever had air plants in your home? They have become one of my favorite plants to keep around because they're easier to maintain than other house plants and you can put them pretty much anywhere (since they don't need a pot of soil to grow in). Inspired by the living walls we see a lot around here in Los Angeles, we made our own version using air plants...living wall art, if you will!
You'll need:
- hammer
- white paint
Here's how:
1. Paint a piece of plywood white.
2. Once dry, hammer nails on the long edge of the plywood on both ends. We placed the nails 1 inch apart. Hammer the nails in halfway leaving enough room to string the elastic cord around the nails.
3. Once all the nails have been hammered in, you can start stringing. Tie a double knot of string one the first nail on the bottom left, then loop it to one of the top nails, then back down again keeping the tension as you go. You can go in a very orderly pattern or go crazy with it! We started from one end and went left to right using two different elastic colors overlapping them in some areas. Once finished, tie off the last string on another corner nail and trim the ends.
4. To hang the board on the wall, you can use picture-hanging strips!
The end result is a fun piece of wall art for your home that also holds air plants. The air plants are super easy to pull in and out when you need to water them and then place them back in their spots!
Original article and pictures take cdn.shopify.com site
Комментариев нет:
Отправить комментарий